TRF-958, Inputs and Outputs
Analog Red, Green, Blue
|
|
Connector type:
Impedance:
Voltage:
Inequality of output signal voltages:
Polarity:
Coupling:
Blanking level:
Offset:
Gain (Y,C):
|
BNC female
75 Ohm
0.7Vpp (at 75 Ohm resistive load)
2%
Positive
DC
0 V
100 mV
Programmable
|
Analog CR, Y, CB
|
|
|
Connector type:
Impedance:
Voltage:
Inequality of output signal voltages:
Polarity:
Coupling:
Blanking level:
Offset:
Gain (Y,C):
|
BNC female (alternative function of Red, Green and Blue output)
75 Ohm
0.7Vpp (at 75 Ohm resistive load)
2%
Positive
DC
0 V
100 mV
Programmable
|
Analog Y, C
|
|
Connector type:
Impedance:
Voltage Y:
Voltage C:
Inequality of output signal voltages:
Polarity:
Coupling:
Blanking level:
Offset:
Note:
|
BNC female (alternative function of Red, Green and Blue output)
75 Ohm
1Vpp (at 75 Ohm resistive load)
0.85Vpp (at 75 Ohm resistive load)
2%
Positive
DC
0 V
100 mV
Programmable
|
Analog CVBS
|
|
Connector type:
Impedance:
Voltage:
Range:
Resolution:
Polarity:
Coupling:
Offset:
Y/C delay:
Black,blanking and burst level:
Burst position:
Chroma subcarrier:
White-to-black:
|
BNC female
75 Ohm
1 Vpp (at 75 Ohm resistive load)
0 - 1.2 V
<10 mV
Positive
DC
100 mV
<40 ns (programmable)
Programmable
rogrammable
3..5 MHz, programmable
92.5 or 100 IRE
|
DV 601/656 Port
|
|
Connector type:
Level:
Data format:
Pin 1:
Pin 9:
Pin 2:
Pin 10:
Pin 3:
Pin 11:
Pin 4:
Pin 12:
Pin 5:
Pin 13:
Pin 6:
Pin 14:
Pin 7:
Pin 15:
Pin 8:
|
D-Sub 15 pin (female)
LVTTL (3.3V)
8 bit parallel, 4:2:2, ITU-BT.656/601
Data Clock
GND
Line Gate (programmable)
Field (0..first, 1..second)
V-Sync (position programmable)
H-Sync (position programmable)
GND
D7
D6
D5
D4
D3
PD2
D1
D0
|
TS (PS) Parallel
|
|
Connector type:
Other:
Pin1:
Pin14:
Pin 2:
Pin 15:
Pin 3:
Pin 16:
Pin 4:
Pin 17:
Pin 5:
Pin 18:
Pin 6:
Pin 19:
Pin 7:
Pin 20:
Pin 8:
Pin 21:
Pin 9:
Pin 22:
Pin 10:
Pin 23:
Pin 11:
Pin 24:
Pin 12:
Pin 25:
Pin 13:
|
D-Sub 25 pin (female)
Connection according to DVB document A010
Differential signals, LVDS synchronous interface
CLKA
CLKB
GND
GND
DATA7A
DATA7B
DATA6A
DATA6B
DATA5A
DATA5B
DATA4A
DATA4B
DATA3A
DATA3B
DATA2A
PDATA2B
DATA1A
DATA1B
DATA0A
DATA0B
DATA VALID A
DATA VALID B
SYNCA
SYNCB
NC
|
Transport Stream Output Signal (Example)
Available streams (according to generator settings):
- Transport Stream (TS)
- Program Stream (PS)
- Video Elementary Stream (VES)
- Audio Elementary Stream (AES)
If there is need of LVTTL signals, including I2S audio and other,
ask „TRF Development Kit”, please.
|
DVI-I
|
|
Connector type:
Other:
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
Pin 10
Pin 11
Pin 12
Pin 13
Pin 14
Pin 15
Pin 16
Pin 17
Pin 18
Pin 19
Pin 20
Pin 21
Pin 22
Pin 23
Pin 24
C1
C2
C3
C4
C5
|
DVI female, 29 pin
Single Link, DVI-I (integrated, digital & analog)
TMDS Data 2- (Digital Red -)
TMDS Data 2+ (Digital Red +)
TMDS Data 2/4 shield
NC
NC
DDC Clock
DDC Data
Analog Vertical Sync
TMDS Data 1- (Digital Green -)
TMDS Data 1+ (Digital Green +)
TMDS Data 1/3 shield
NC
NC
+5 V
GND
Hot plug detect
TMDS Data 0- (Digital Blue -)
TMDS Data 0+ (Digital Blue +)
TMDS Data 0/5 shield
NC
NC
TMDS Clock shield
TMDS Clock+ (Digital Clock +)
TMDS Clock- (Digital Clock -)
Analog Red
Analog Green
Analog Blue
Analog Horizontal Sync
Analog GND for Red,Green, Blue signals
|
Pinout (Front side of the female socket)
|
HDMI
|
|
Connector type:
Other:
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
Pin 10
Pin 11
Pin 12
Pin 13
Pin 14
Pin 15
Pin 16
Pin 17
Pin 18
Pin 19
|
HDMI type A, 19 pin, standard connection
V1.3 Compatible, Hot Plug Detect
TMDS Data2+ (Digital Red +)
TMDS Data2 Shield
TMDS Data2– (Digital Red -)
TMDS Data1+ (Digital Green +)
TMDS Data1 Shield
TMDS Data1– (Digital Green -)
TMDS Data0+ (Digital Blue +)
TMDS Data0 Shield
TMDS Data0– (Digital Blue -)
TMDS Clock+ (Digital Clock +)
TMDS Clock Shield
TMDS Clock– (Digital Clock -)
NC
NC
DDC Clock
DDC Data
DDC GND
+5 V
Hot Plug Detect
|
Pinout (Front side)
|
RF Output/s (Rear panel)
|
|
Connector type:
Impedance:
Note 1:
Note 2:
|
BNC female
75 Ohm
Up to 2 RF outputs available in single unit
according to generator options
For details and available modulators
see „Technical Specification”
|
Audio In, Out (Rear panel)
|
|
Connector type:
Level:
Output Signal:
|
Jack 3.5mm stereo (female)
see „Technical Specification”
30 Hz - 5 kHz, programmable shape and level
|
Control Port (Rear panel)
|
|
Connector type:
Pin 1:
Pin 9:
Pin 2:
Pin 10:
Pin 3:
Pin 11:
Pin 4:
Pin 12:
Pin 5:
Pin 13:
Pin 6:
Pin 14:
Pin 7:
Pin 15:
Pin 8:
RS-232 Interface:
|
D-Sub 15 pin (female)
Main +5V/50 mA (available also when power is off)
RS-232 Enable (0 or NC..disabled, 1..Enabled)
Connected to pin 1
GND
Generator TX (connect to RS-232 RX input)
GND
Generator RX (connect to RS-232 TX output)
GND
+5V/50 mA (when power is on)
GND
+3V/30mA (when power is on)
Control output (Optocoupler, Emitter, VCE<20V)
Control output (Optocoupler, Collector, Imax=20mA)
Control input (Optocoupler, Cathode, Uctrl 0V/3..9V)
Control input (Optocoupler, Anode, Ifw limited)
Baud rate 9600 bps (programmable)
8 data bits, 1 start bit, 1 stop bit, odd parity
|
USB (Rear panel)
|
|
Connector type:
Version and driver:
|
USB type B
USB 2.0, for details see „Technical Specification”
|
Info (TRF958, TV generator PAL-SECAM-NTSC-HDMI-DVI-MPEG-DVB)
FAQ (TRF950, TRF958: Frequently Asked Questions)
Inputs_and_Outputs (TRF958, Inputs and Outputs)
Extra_Accessories (TRF958, Extra Accessories)
Custom_solutions (Custom solutions)
Test_Patterns (TRF-95x, Test Patterns)
TRF-958_(REV09A) (PDF)
|